Looking for new AIO cooler, will never buy. NZXT product again!
I emailed email - firstname.lastname@example.org also.
Am looking for a new AIO Liquid Cooler
I just installed the fans direct to a motherboard header using a 4 port fan hub, i control the fans with bios and the pump also.
after setting your light display you can delete CAM software from your computer and the light display will stay.
maybe a oven thermometer?
Ryzen 3600 with GA-AX370 Gaming 3 Mobo. CPU temp stuck at 50% in info viewer but am able to configure smart lighting which somehow reports temp accurate by colour. CAM is not reporting accurate temp in the info viewer tab but when you choose smart lighting and set colour temp to CPU, the colour temp reports the correct temp. This is confirmed thru the smart lighting APP which can control RGBFusion by mobile which is running simultaneous. My BIOS reports the temp correctly. I have fans and pump connected thru the cam software and not thru the mobo.
plug the fans into motherboard 4 pin header and control via PWN in Bios.
leave the pump plugged into a CPU_Opt header or pump header and and control in bios with voltage.
set the light show you want then uninstall CAM software, the light show will stay even with CAM software uninstalled.
FANS are 4 pin so PWM, and Pump is 3 pin so voltage, for bios settings.
Hi, if you have updated to 3.6.6 and are still having issues with your hardware or software, please open a new ticket and provide us with your logs so we can review what is happening.
Please try to be as descriptive as possible concerning what you consider to be working incorrectly, by specifying what hardware you have and what it is not doing which it should be doing.
This helps us greatly while trying to replicate the errors to verify why they are happening.
Radeon RX 5700, not detected in CAM software.
Ryzen 3600 CPU temp also shows 50c at all times
Kraken X72 colour temp is working!
x72 Kraken, Ryzen 3600 CPU, CPU temp stuck at 50c