CAM Bugs

Please post your bugs/issues here. Be sure to browse first however, as someone may have already submitted a similar issue.

  1. CAM 3.3.5 Overlay not working for most games!

    The overlay isn't working with most of my games which is odd because it was working just fine about 2 weeks ago. I think it might have been an update that caused it to stop working but the only game it works on at thew moment is Overwatch.

    531 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    203 comments  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
    under review  ·  Eric Lam responded

    Hi there, please be sure you are on the latest version of CAM from camwebapp.com. The most current version is 3.5.3

    The overlay requires DirectX Runtime to be installed.
    Please install DX Runtime and then restart your PC and see if the overlay works. The link below will take you to the download site for the installer.
    https://www.microsoft.com/en-us/download/details.aspx?id=35

    Also make sure that you have tried manually enabling the overlay with the short keys (Shift + O). These shortcut keys can be changed from settings in CAM as well.

    If the instructions above does not work please let us know which games the overlay is not working on.

  2. after pc wakes from sleep mode, logo does not light up.

    Kraken X62
    CAM V-3.5.20
    windows 10 pro (Fresh install on new drive)

    If you need more info just ask

    54 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    27 comments  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
    under review  ·  Eric Lam responded

    Hi there, are you using fixed mode? If so can you try setting to a different lighting and see if this same behavior exist?

  3. Cannot access settings when using Cam on second screen

    I use two monitors. My main 25601080 monitor and a second 19201080 monitor.

    Like many with multiple screens I prefer to use CAM on the second screen so I can see all the info when I'm gaming.

    However as soon as I move CAM to the second monitor I lose the minimize/maximise/close icons and all the settings icons.

    Main Screen - https://i.imgur.com/uc8pRo8h.png

    Second screen - https://i.imgur.com/d65vzjDh.png

    See the difference?

    71 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    under review  ·  24 comments  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
  4. v3.5 less Led Sync Options than v3.35

    The new update is kind of frustrating. The options for the Led lighting is less than in the previous Version. No Marquee oder Candle light or something else. You have only the full option in the single Channel mode. And at some modes you cant change the colors, because there is only a default preset and you can't add a custom profile. Please fix it. An update should be better than the previous Version.

    22 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    5 comments  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
    under review  ·  Eric Lam responded

    Hi there, this issue seems to be that you are trying to adjust your lighting in sync mode. Can you try going into your HUE+ channel and see if you have all the options available?

  5. Rpm

    Hi
    Just got a brand new Kraken X52. Its gorgeous.
    But the CAM Software for fan control is useless..
    Although my fans are spinning at a low speed, I dont seem to be able to control their speed and CAM shows 0 rpm.
    Already put cpu fan at 100% on Bios. Changed nothing.
    I got an Asus Maximus VIII Hero to control my other fans.
    Fan Expert does not recognize a CPU fan. I guess that is normal. Is it possible that some incompatibility with Asus Software prevents CAM from controling the fans?
    As far as I could see, several…

    5 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    4 comments  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
    under review  ·  Eric Lam responded

    CAM reads the CPU_Fan header on most motherboard. Please verify that you have the CPU Fan connected to the CPU_Fan header on your motherboard. If you have a AIO_Pump, W_Pump on your motherboard you can try those header as well.

    If you are using a Kraken, please be sure to have at least one of the radiator fans connected to the 4 pin header on the Kraken fan port. The Kraken pump cable should be connected to the CPU_Fan header on your motherboard as well.

  6. 1 vote
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
    under review  ·  Eric Lam responded

    If you see the CAM preview window when you hover over the task icon in your taskbar but the window doesn’t appear when you click on the icon. You might be experiencing an issue where the window is on a different “phantom” monitor.

    Try doing this, press on the CAM preview window when you hover over the task icon. Then click "Shift + Windows Key + Arrow Key (<,>) to return the CAM window to your usable desktop space.

  7. BF4 Issues 3.5.50

    Bettlefield 4 stop working with CAM overlay enabled. With it disabled it functions.

    3 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
    under review  ·  Eric Lam responded

    Hi there, can you try playing BF4 in full screen and see if the overlay works then?

  8. Using a 3440x1440p monitor custom CAM overlay

    Using a 3440x1440p monitor (34"), I cannot seem to get CAM to let me move the overlay. Since so many games have HUD aspects in each and every corner, I want my overlay on the outside of any of them so that I can still read both.

    I used to have no issue on 1080p just tweaking the coordinates, but on 3440 it goes nuts.

    Say its 0,0 and the overlay is in the top left. I can change X all the way to like 50 or a hundred and it still stay in the top left. It isn't always…

    1 vote
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
    under review  ·  Eric Lam responded

    Hi there, please update to latest version of CAM and see if this issue persist. camwebapp.com

  • Don't see your idea?

CAM Bugs

Categories

Feedback and Knowledge Base