I have 2x kraken 41s
1 for cpu and other for gpu
After recent software update fans started revving up and down constantly.
even if i set it on 100% speed it will not stick to the full power.
constant humming up and down.
not sure what to do?
Please install this version of CAM
It will fix this issue.
Same problem with Grid+ V2 Version CAM 3.5.60 =((
4x Corsair SP Series, SP120 RGB LED
1 x Cooler master
1 x Thermaltake Riing 12 RGB Series High Static Pressure 120mm Circular RGB LED Ring
The fan speeds are flucuating up and down with any profile and it its really annoying!!
Please help me!
I have 2x Kraken X60 coolers on the CPUs and an X41 on the GPU. I've run this setup using CAM for 4 years and never experienced this.
Ever since the recent major CAM update, the fans pulse constantly no matter what the Hysteresis setting is.
This happens regardless of the curve. I can set the curve to a constant 100% and they all still spin up and down as if the power were oscillating on and off every second.
It's unbelievably annoying.