If you think Cam is bad, you haven't seen Thermaltakes DPS G App for their PSU's yet. lmao
If you really need to use Cam try v184.108.40.206
the newest cam and windows 10 build update are incompatibel
my advice make 2 equally big partitions on your drive and install dual boot system with 2 x windows 10.
one only for games and no cam or other programs installed and all that windows spyware crap disabled, uninstalled and deleted.
and then another windows 10 for entertainment with all programs, apps and all the other crap installed.
use the first windows 10 for your sensible stuff like online banking, mails etc.
it's easy to do.
if you want to manage your dual boot check out EasyBCD and Windows Msconfig.
ALL YOUR PORN!!!
Easy solution, uninstall cam, reinstall windows, pull out the kraken and throw it out the windows. enjoy your new freedom and peace.
Custom water loop is better than all AiO's. believe me. i'm in the process to switch over.
when i finish my build my cpu and gpu temps will be at ambient temps at full load!
no AiO can cool your hardware at ambient temps.
my plan is to use min 2 or 4 x 560 radiators with 86 mm thickness in push/pull config lol.
it will be a total cooling overkill but i don't care. i'm making my sys ready for Ryzen 9 3850X 16 cores x 5,1 ghz, will try to oc atleast to 5,5 ghz.
and NZXT can stick their Cam crap up their open butts. no more defect spyware on my system.
i still believe disabled kindergarten children could have written a better Cam software than this idiots responsible for Cam.
Ok, i did some further improvements. latency is now at only 10+- μs
open elevated command prompt and type
bcdedit /deletevalue useplatformclock
bcdedit /set disabledynamictick yes
Hi, if you have updated to 3.6.6 and are still having issues with your hardware or software, please open a new ticket and provide us with your logs so we can review what is happening.
Please try to be as descriptive as possible concerning what you consider to be working incorrectly, by specifying what hardware you have and what it is not doing which it should be doing.
This helps us greatly while trying to replicate the errors to verify why they are happening.
Only solution that really works to fix that problem with the Cam software development team
Or just use Cam version 220.127.116.11 it works.
the latest versions
3.6.0 – 7/17/18
3.6.1 – 7/18/18
3.6.2 – 7/20/18
3.6.3 – 7/21/18
3.6.4 – 7/25/18
3.6.5 – 7/27/18
3.6.6 – 7/31/18
3.6.7 – 8/14/18
3.7.0 – 8/21/18
3.7.1 – 9/11/18
3.7.2 – 9/19/18
3.7.3 – 10/02/18
they all don't work!!!