Martin

My feedback

  1. 22 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    4 comments  ·  CAM Bugs » Hardware  ·  Flag idea as inappropriate…  ·  Admin →

    Hi, sorry for the inconveniences you are experiencing with our software.

    If you are using a Kraken X31/X41/X61 and CAM is not detecting the device. You can try these troubleshooting steps
    Please go to the Devices Page and select “Detect Devices”
    Please exit out of CAM and install this Kraken driver https://www.dropbox.com/s/ktdih3rifenohk4/Kraken%20chip%20Driver.zip?dl=0 then restart your PC and see if CAM detects the Kraken
    Go into Control Panel and click on “View Devices and Printers” then remove the 690LC/Asetek Driver/Unknown USB Device and restart your PC. Then check CAM again.
    If you still see a Unknown USB Device, then it seems that the USB cable is creating a bad connection to the motherboard. This likely means the unit would have to be replaced. Please contact our support team over at https://www.nzxt.com/customer-support to look for an RMA on the unit.
    If you do not see any these devices then that means that…

    Martin shared this idea  · 

Feedback and Knowledge Base