Zorux

My feedback

  1. 538 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    4 comments  ·  CAM Bugs » Hardware  ·  Flag idea as inappropriate…  ·  Admin →
    Zorux commented  · 

    Nerver buying NZXT again.

  2. 702 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    3 comments  ·  CAM Bugs » Desktop  ·  Flag idea as inappropriate…  ·  Admin →
    Zorux supported this idea  · 
  3. 1,540 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    54 comments  ·  CAM Bugs » Desktop  ·  Flag idea as inappropriate…  ·  Admin →

    Hi, if you have updated to 3.6.6 and are still having issues with your hardware or software, please open a new ticket and provide us with your logs so we can review what is happening.

    Please try to be as descriptive as possible concerning what you consider to be working incorrectly, by specifying what hardware you have and what it is not doing which it should be doing.

    This helps us greatly while trying to replicate the errors to verify why they are happening.

    Thank you.

    Zorux commented  · 

    I will never buy another NZXT product again thanks to the continual issues I have from the CAM software updates.

    Zorux supported this idea  · 
  4. 159 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    1 comment  ·  CAM Bugs » Desktop  ·  Flag idea as inappropriate…  ·  Admin →
    Zorux commented  · 

    I have the same pronlem. Using 2 sticks g-skill Z.

  5. 13 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    18 comments  ·  CAM Bugs » Hardware  ·  Flag idea as inappropriate…  ·  Admin →

    Hello Anonymous, if you don’t have a ligting tab, it’s possible that CAM is not detecting your Kraken. Please try these troubleshooting steps to see if this fixes your issue:
    If you are using a Kraken X42/X52/X62/X72 and CAM is not detecting the device. You can try these troubleshooting steps.
    Please go to the Devices Page and select “Detect Devices”
    Please exit out of CAM and install this Kraken driver https://www.dropbox.com/s/ktdih3rifenohk4/Kraken%20chip%20Driver.zip?dl=0 then restart your PC and see if CAM detects the Kraken
    Go into Control Panel and click on “View Devices and Printers” then remove the NZXT USB Device/Unknown USB Device and restart your PC. Then check CAM again.
    If you still see a Unknown USB Device, then it seems that the USB cable is creating a bad connection to the motherboard. You can try using a different USB cable to check and see if the USB cable that came…

    Zorux commented  · 

    I have the same problem!

Feedback and Knowledge Base