Why speed fans 100% after 75/80°c?
When cpu or gpu temp hits 75/80 degrees it forces all the fans to 100%. Why? It's possible to allow us to set a max speed for fans to never reach 100% please? Because when CPU start to up is temp, it reachs the limit of 75/80 before cpu fans start to lower is temp. It tooks only few seconds but grid+ v2 starts immediatly to set fans to 100%!
Please allow us to disable this 100% speed fan automaticaly applyed.
Thanks a lot.
(Sorry for my bad english.)
Kévin
shared this idea
Hello,
We will look into this but will most likely not do it because it is more for safety why they are running at 100% when it goes over 75C.
8 comments
-
Victor Carruyo
commented
On the same boat with a 200i and 700i plus Noctua IPPC 3000s.
"My fans are deafeningly loud at 100% (Noctua IPPC 3000s). Please ffs remove this crap, and let us be the judge of what's safe and what's not. Even if you guys have to put a disclaimer to unlock full control, just please remove this limit. You guys make fine fan controllers choked by crappy software."
-
Anonymous
commented
When NZXT offer af fixed limit from 0-100%, they should also offer a curve up to max x%
-
SeventeenSec
commented
Sorry, I can't edit my prior post... I wanted to add this is because I use CAM to control my case fans only and these settings are tied to GPU temperatures. My CPU fans are controlled by the Kraken x62. I never need my case fans to run at 100%. There's no additional benefits of them running past 80% -- the GPU doesn't run any cooler. I only get more noise.
Hope that adds more context as to why being able to set the max fan speed would be useful for users.
-
SeventeenSec
commented
I came here to suggest the same thing. I wish to be able to set my maximum fan speed to something like 80%. I can understand why you'd want 100% as a default, so leave it that way, but have a feature somewhere else (under settings maybe) that we can uncheck to allow this. Then have the max fan speed in the graph adjustable as another point on the far right side.
Your products are targeted for enthusiasts, so please allow us to fully control them if we desire to do so.
-
Justin Booth commented
Sorry to necromance this thread but I agree here. My fans are deafeningly loud at 100% (Noctua IPPC 3000s). Please ffs remove this crap, and let us be the judge of what's safe and what's not. Even if you guys have to put a disclaimer to unlock full control, just please remove this limit. You guys make fine fan controllers choked by crappy software.
-
jared
commented
This should be unlocked when using GPU temp instead of CPU temp for fan speed.
-
jared
commented
Temperature control: 100% fans at 80 degrees?
So I wish to control my Kraken with GPU instead of CPU/liquid temps. However, it is really bad design that 80 degrees is always 100% fan speed and that this isnt changable. Sure, 100% fans for 80 degrees is a good idea for CPU or liquid, it just doesn't make sense for GPU.
Please allow changes so that I am not forced to choose 100% fan speed for GPU- at least not till like 90/100 degrees.
My cards run pretty hot, close to 80, and I don't want it always at 100% usage. -
tamim
commented
I have a problem with the heat in the games going up to 67 Is this normal