This is basically an expansion on the select cpu sensor idea.
Even though I use multiple platforms the idea of being able to lock fans to different sensors is one I am very keen on.
My AM3+ gaming machine has all fans bar the CPU fan set to the GPU since that kicks out more hot air than the CPU ever will.

But with different sensor options I could stick a grid+ v2 into my AM4 audio workstation to control airflow all over the case based on M.2 temps, ambient, cpu, harddrive or even voltage going into my soundcards...that would be freaking ace.

The preset fan curves for X42 in CAM are very limited. There is little to no modification allowed to them. It would be nice to see more flexibility in modifying these as currently, you only have access to changing CPU fan inbetween 25 and 75 degrees! what is that?

This is very limiting and is rather poor in my view. Having spent cash on additional fans it would be nice to harness the extra power they have with a more flexible fan curve(s).

If there is something i can do or if there is something i'm missing please tell me. This has somewhat irritated me.

If CAM would open after a clean install but would refuse to open after PC had restart or shutdown (or would just refuse to open eventually) then hopefully this will help you.

After trying to reinstall multiple times, trying all the suggestions from the admins and banging my head against my desk for a while, it turns out the problem was my actual CAM account...
After a fresh install of CAM and creating a fresh account with a secondary email CAM is working fine.

The exact steps I to are...

1. Uninstall CAM (again!!!)


2. Restart PC


3. Download the latest version of CAM (in my case V3.3.1)


4. Reinstall CAM but DO NOT SIGN INTO CAM!


5. Proceed as a guest to make sure everything is running properly


6. Restart PC to see if CAM opens on start-up (if you use this function)


7. On the CAM log in screen click link to create a new account


8. Log-in to CAM using new account

This fixed CAM for me and it is running the way it was meant to.
Make sure you have downloaded and installed any other updates/software recommended by CAM notifications (like the 'DirectX End User Runtime' from Microsoft)

I hope this helps some people out, good luck

Add fan curve editor for both kraken and grid+ that's similar to MSI Afterburner. Allow pump speed control for kraken x61, x41, and x31. Editor to allow users to create their own lighting effects for hue+. Add separate FX per led strip, per channel. Rename Wave light effect to Knight Rider (lol, couldn't help myself). Use msi afterburner as inspiration to create a much more complex overlooking tool. In app feedback and bug report. DirectX12 overlay support. Cpu overclocking tool. Preset static pressure and airflow setting for kraken (and maybe grid+) for people who use one type of fan or mixed variety in their system. Proper pwm support for third party fans (cough corsair sp120's and sp140's are either full on or full off when used with kraken/grid cough). Maybe send me a kraken x62?

So it would kinda work like the sync mode, only it would reverse in direction halfway through. So at say 1/4 volume/intensity with 4 strips it would look something like this

..........|.....-----|-----.....|.....

or with 2 strips it would be like this:

.......---|---.......

( . being off, - being on and | being the break between strips)

this would work especially well for those of us who use the Hue strips on our desks as currently the lighting is kinda lopsided when I use audio mode unless it's at full intensity (my monitor sits right between strip 2 and 3 out of 4)