CAM Bugs

Please post your bugs/issues here. Be sure to browse first however, as someone may have already submitted a similar issue.

Encountered an issue with CAM? Post it here!

You've used all your votes and won't be able to post a new idea, but you can still search and comment on existing ideas.

There are two ways to get more votes:

  • When an admin closes an idea you've voted on, you'll get your votes back from that idea.
  • You can remove your votes from an open idea you support.
  • To see ideas you have already voted on, select the "My feedback" filter and select "My open ideas".
(thinking…)

Enter your idea and we'll search to see if someone has already suggested it.

If a similar idea already exists, you can support and comment on it.

If it doesn't exist, you can post your idea so others can support it.

Enter your idea and we'll search to see if someone has already suggested it.

  1. h500i lights cant be detected

    my h500i case lights cant be seen in CAM. The Cam doesnt also show the light tab in the left panel. i reinstalled cams but still doesnt see it.. For the past few weeks, it was working just fine but now its not working anymore. i have the latest version of CAM which is 3.7.5

    6 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Hardware  ·  Flag idea as inappropriate…  ·  Admin →
  2. How to recover yahoo password without phone number and alternate email

    People with forgetful nature usually forget their account passwords. Are you one of them? Or you are unable to make your account login even after entering the correct password? We have come with an amazing way that will help you in recovering your Yahoo! password without using the recovery phone number or alternate email address. You simply need to click on I don't have access to this phone if you don’t have any of these two options. Follow the steps given here and recover your account password.

    Recover Yahoo! password without phone number, alternate email?

    • Navigate to the Yahoo!…

    1 vote
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    1 comment  ·  Hardware  ·  Flag idea as inappropriate…  ·  Admin →
  3. x62 kraken LED not working

    New x62 Kraken LEDs and LED strips on the H500i not working. The LED strips connected to the HUE+ on the H500i are turning on but will not change colour in CAM. As for the kraken the unit is being found in CAM and seems to be operating correctly but again the LEDs will not turn on at all.

    10 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    4 comments  ·  Hardware  ·  Flag idea as inappropriate…  ·  Admin →
  4. 9 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    3 comments  ·  Crashing  ·  Flag idea as inappropriate…  ·  Admin →
  5. Fans are not spinning when i turn on my pc

    I have a grid v3, every fan is connected to a single port.

    2 jetflow: 4.8W each, so they're under the 5w limit you speak of,
    they're not connected together.

    1 corsair ml : 2,7w

    in the last 3 headers: 3 aereocool p7-f12: 1.8w each

    If I shut down my pc and then back on, 3 times out of 5 the fan stop spinning all together.
    I know, if I turn off my PSU, wait 10 seconds and try it again everything works fine, but anyway, this is a 70 euro product here in Italy, the fans don't exceed the…

    3 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    1 comment  ·  Hardware  ·  Flag idea as inappropriate…  ·  Admin →
  6. Cannot download

    I've tried to install the CAM software, and when i try to download it, it gives a blank page that 404's.

    4 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
  7. Unable to launch with program blocked in firewall. CAM auto-unchecks Remember me

    Unable to launch with program blocked in firewall. CAM auto-unchecks Remember me and will refuse to finish starting. Yet it works great if i disable my network adapter.

    I already had to fix multiple issues with my case including missing rivets, bent steel, stripped screws and a misaligned power button. I don't have patience for malicious behavior with your fan controller software too.

    3 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    2 comments  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
  8. stuck at 100% for adaptive noise reduction for a whole night

    the cam software stuck at 100% for adaptive noise reduction for a whole night, i tried to restart the pc and reinstall cam, neither worked.

    10 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    1 comment  ·  Crashing  ·  Flag idea as inappropriate…  ·  Admin →
  9. I opened CAM, and I can no longer change my hue??? where do I go?

    no longer an option to change my hue in new update

    6 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
  10. Cam 3.7.5 Kraken not detected

    Kraken was working fine until I updated the software, now it has disappeared.

    5 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    1 comment  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
  11. Lighting preset options not available.

    I have h700i with two included led strips connected to the smart device but half of the lighting preset options are not available for me for example the 'rainbow flow'. When I click an unavailable option it only says ''the current mode is not supported with the current selected channel".

    9 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    1 comment  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
  12. How to Recover Yahoo Account without Email

    Looking out for some information about Yahoo account recovery? Get it here
    There are some instances when a Yahoo account user forgets the password of their Yahoo account and even don't have access to the recovery email address. In that case, recovering Yahoo account password becomes a trouble and to reset the password a user search around.

    Visit: http://www.webesupport.com/yahoo-account-recovery

    1 vote
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    1 comment  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
  13. Got cam semi working for me.

    Were to start. I have save 3 user accounts on my PC 1 being a admin and 2 for standard users.
    I install CAM Software under a standard user but running the CAM software installer as admin.

    Once installed i noticed nothing is happening when i click the desktop CAM icon. I look in task manager and see its up to something. but nothing pops up.
    But if you go to the CAM install folder for me its "C:\Program Files (x86)\NZXT\CAM" and then i run CAM.Desktop.exe i then get it all working!
    So for me i need to run the…

    3 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    3 comments  ·  Crashing  ·  Flag idea as inappropriate…  ·  Admin →
  14. Get Office Setup via OFFICE.COM/SETUP

    Microsoft office setup is the product setup record with this setup document you can introduce on your PC and a portion of the bolstered device to utilize Microsoft office. The Microsoft Office programming has the setup record, and it is essential, without the setup document the product turn pointless. You can easily download the setup record from the official website Office.com/setup.
    https://www.antivirusbaba.com/setup-ms-office/how-to-setup-microsoft-office-without-cd/

    1 vote
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    1 comment  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
  15. CAM - Showing as "USB Input Device" in device manager

    Occasionally, upon boot. CAM does not launch correctly and shows a yellow mark on device manager. Can be fixed by disabling and re-enabling the device. But I honestly believe CAM should have a LEGITAMTE DRIVER you install, alongside the cam software you download.

    Ryzen 2600
    RX 580
    32GB DDR4
    512 GB m.2
    2TB HDD

    ASrock Steel Legend B450m

    Issue is across multiple CAM powered Cases, (H400i, and H200I)

    so I know its not a hardware issue. Unless there's poor quality control on your end.

    4 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Crashing  ·  Flag idea as inappropriate…  ·  Admin →
  16. rgb on pump not changing colors

    hi, i recently bought the x62 kraken, got evertyhing connected, the fans are working and pump lights are on but they seem to be stuck on the default color, when i try to change colors on cam, the color changes on the app, but the pump remains the default color. Ive made sure im not in sync mode and dont know what else to do.
    Thanks in advance

    4 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
  17. Unable to change Kraken x62 Lighting

    I have not been able to change/update my Kraken X62 lighting after upgrading to Cam 3.7.4. Please help.

    21 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Hardware  ·  Flag idea as inappropriate…  ·  Admin →
  18. There is no option for changing colors in the software after the update i have done.

    I cannot change the colors........there is no option in the program any more..

    4 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    2 comments  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
  19. How To Fix OK Google is not working

    If your are facing issue with Google Now, I have found a perfect solution for that. I`ve seen many users reporting that when ever they say Ok Google there is no response from Google Now. In the end they have to open the app in order to use Google Now. In the following method I’ll tell you how to fix Ok Google is not working.

    How To Fix OK Google is not working:

    Watch your language:
    First thing you must do is check Google Now lunguage settings, head over to Go to Voice > Search Language Settings > Offline Speech…

    2 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    1 comment  ·  Crashing  ·  Flag idea as inappropriate…  ·  Admin →
  20. Can't change fan speed

    I can't change fan speed for any of my devices. Worked fine before. When changing speed nothing happens. My fans are running super fast for the moment and it's driving me nuts.

    3 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: facebook google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
  • Don't see your idea?

CAM Bugs

Feedback and Knowledge Base