Wrong temperature shown
Cam cpu temperature freezes.
*** shows an idle temp of 44°C which is correct.
Once I run Prime95 and all cores go to 100% load, HwInfo shows 77°******* shows 46°C and the temperature is frozen at this value, until I close Prime. Then it instantly goes back to 44°C even though HwInfo still reports 60°C (which is slowly cooling down).
I can't use the CPU Fan curves at all because the cpu temperatures are wrong.
It nearly triggered a emergency shutdown, because the fans only go to higher speeds when temperature is over 70°C which according to *** NEVER happens - this overclocking session hwinfo showed 90°+C while CAM still froze at 46°C.
Thank you for reporting this. We are implementing a fix for the incorrect reading of temperatures in the next update (3.6.7) sorry for the inconveniences.
yes, I had the same. over 8000C. Also my CPU frequency is indicated as 4700MHz althought it is 3700MHz.
this soft is crap
you lucky one.
my temp exceeded 8033°C today...
not joking! EIGHT THOUSAND!