Encountered an issue with CAM? Post it here!

Updated to 3.6.6, my cooling tab has gone away

My cpu runs noticeably hotter, 8-10 degrees Celsius, now that I can't control fan speeds to cool the liquid in the radiator better.

3 votes
Sign in
Sign in with: Facebook Google
Signed in as (Sign out)
You have left! (?) (thinking…)
Jeremy shared this idea  ·   ·  Flag idea as inappropriate…  ·  Admin →
started  ·  AdminMax Nzxt (Admin, CAM ) responded  · 

Hi, if the cooling tab is gone, it might be that CAM is not detecting the cooling hardware that you have connected. Please try these troubleshooting steps and let us know if it works for you.

If you are using a Kraken X31/X41/X61 and CAM is not detecting the device. You can try these troubleshooting steps
Please go to the Devices Page and select “Detect Devices”
Please exit out of CAM and install this Kraken driver https://www.dropbox.com/s/ktdih3rifenohk4/Kraken%20chip%20Driver.zip?dl=0 then restart your PC and see if CAM detects the Kraken
Go into Control Panel and click on “View Devices and Printers” then remove the 690LC/Asetek Driver/Unknown USB Device and restart your PC. Then check CAM again.
If you still see a Unknown USB Device, then it seems that the USB cable is creating a bad connection to the motherboard. This likely means the unit would have to be replaced. Please contact our support team over at https://www.nzxt.com/customer-support to look for an RMA on the unit.
If you do not see any these devices then that means that the Kraken is not making a connection to your motherboard as Windows does not detect the driver. You may want to contact Microsoft and see if they have any input as to why your USB device is not recognized in Windows.
Try shutting off your PC, then plug the USB cable to a different USB header on your motherboard.
This is to check if the USB port on the motherboard is working correctly.
Try turning off your PC and turn off your PSU for 10 seconds, then turn your PSU and PC back on and check CAM again


Sign in
Sign in with: Facebook Google
Signed in as (Sign out)

CAM Bugs: Hardware

Feedback and Knowledge Base