CAM Bugs

Please post your bugs/issues here. Be sure to browse first however, as someone may have already submitted a similar issue.

  1. Cam not detect an new update is available?

    Hello, why my Cam not detect an new update is available? Even if i check if new update is available, he tell me no...
    Since version 3.3.5 I had to install version 3.5 manually and currently has 3.5.3 is available but my cam do not see it .... why?

    4 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Crashing  ·  Flag idea as inappropriate…  ·  Admin →
  2. Graphics load at 0% on NVIDIA GForce GTX 960 M after update

    With the previous version it would show load but not temp. After update to 3.5.50 it now shows temp but not load. Tried this fix:

    Please install this and try again:
    https://www.dropbox.com/s/sueit2n6gsngo44/vcredist_x86.exe?dl=0

    No change. Thanks

    1 vote
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Hardware  ·  Flag idea as inappropriate…  ·  Admin →
  3. Choppy/Laggy HUE+ Effects

    I've purchased the NZXT HUE+ about a year ago (around last Christmas to be more specific), and I've been using it ever since. But ever since first plugging it in and enabling it within CAM software, some of the effects do not appear to be as smooth as I would imagine them being.

    At first I thought this was just something that everyone had or deals with, but I noticed through reddit posts and YouTube videos that some of their effects (such as the SPECTRUM WAVE) appears to be buttery smooth in its transition and how it appears, even on…

    1 vote
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Hardware  ·  Flag idea as inappropriate…  ·  Admin →
  4. Wont boot

    mobil is shit dosent even work

    3 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Mobile  ·  Flag idea as inappropriate…  ·  Admin →
  5. On the normal CAM display page the needle and slider on the guage do not match. Please fix so they display the same angle.

    On the normal CAM display page the needle and slider on the guage do not match. Please fix so they display the same angle.

    1 vote
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
  6. BF4 Issues 3.5.50

    Bettlefield 4 stop working with CAM overlay enabled. With it disabled it functions.

    3 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
    under review  ·  Eric Lam responded

    Hi there, can you try playing BF4 in full screen and see if the overlay works then?

  7. 1 vote
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Hardware  ·  Flag idea as inappropriate…  ·  Admin →
  8. When I use the Sync option on the audio it doesn't work properly

    Initially when I used sync it would go through the whole color cycle properly according to the songs, now it only uses the first two colors in the color cycle.

    3 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Hardware  ·  Flag idea as inappropriate…  ·  Admin →
  9. Cam software ( NEW UPDATE )

    i updated my cam software and now it only CRASHING and i cannot launch my cam software

    1 vote
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Crashing  ·  Flag idea as inappropriate…  ·  Admin →
  10. Unable to Edit Fan Settings On Kraken

    IM NOT ABLE TO EDIT HE FAN SETTINGS AND MY CPU OVERHEATS CONSTANTLY HELP

    1 vote
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Hardware  ·  Flag idea as inappropriate…  ·  Admin →
  11. Audio Sync Lights up All lights

    Any kind of audio using "Sync" just lights up all but one light at the "top" of each device and it flickers. Not very good audio syncing. I'd call this broken.

    Cam 3.5.0
    Hue+ 4.3.2
    Kraken 2.0.18

    1 vote
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Hardware  ·  Flag idea as inappropriate…  ·  Admin →
  12. Using a 3440x1440p monitor custom CAM overlay

    Using a 3440x1440p monitor (34"), I cannot seem to get CAM to let me move the overlay. Since so many games have HUD aspects in each and every corner, I want my overlay on the outside of any of them so that I can still read both.

    I used to have no issue on 1080p just tweaking the coordinates, but on 3440 it goes nuts.

    Say its 0,0 and the overlay is in the top left. I can change X all the way to like 50 or a hundred and it still stay in the top left. It isn't always…

    1 vote
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
    under review  ·  Eric Lam responded

    Hi there, please update to latest version of CAM and see if this issue persist. camwebapp.com

  13. Multiple Issues

    I'm now getting a message each time I turn on my Rig, all these started when I attempted to update the firmware the other day.

    1:- "Hue+ has been detected and successfully added to CAM"

    2:- "Your CPU Fan has lost connection and is no longer spinning" ... Yet, the Kraken x62 is visibly spinning...

    moreover, this is happening after the first time I attempted to install the new firmware, which, by the way, is still nagging me to install it, furthermore, the Kraken driver is now always highlighted in settings as if it's asking me to install it, even…

    1 vote
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    6 comments  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
  14. CAM Keeps popping up the error "Upload setting had failed"

    It says "Upload setting had failed" "Please try save your component setting again" multiple times a minute. This happened after uninstalling and reinstalling the latest version of CAM after an update failed, Version 3.1.71.

    62 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    50 comments  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →

    Hi,

    Please update to version 3.6.7 by downloading from here: https://camwebapp.com/download/

    I’d suggest uninstalling the previous version before installing the new version as a clean install rather than updating it.

    Please let me know if the issue is resolved after this.

    Thanks.

  15. New CAM update has caused me to lose most of the software installed on my hard drive

    I received notification of a new CAM update this morning and I chose to install it as usual. I have most of my software for my PC in a directory on my HDD which is also where CAM is installed. When I returned home I noticed that since the update CAM had installed straight into the Software folder and not into its own subfolder which left quite a mess so I thought the safest option would just be to uninstall CAM and reinstall it again ensuring it was in a subfolder. Unfortunately after uninstalling it has wiped every piece of…

    3 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    3 comments  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
    Eric Lam responded

    Hey there, you are correct in that when CAM is uninstalled it will remove the files inside the NZXT folder. Do you remember the directory in which you installed CAM? That could play a factor as well. I do apologize for issue you are going through.

  16. Grid+

    Installed grid+ according to manual.never worked.i followed basic troubleshoot.never worked.at this time i have connected a new usb cable to external port.now i can see a grid+ tab at cam,fans are working at 100% speed and i cant control them there is 0 w and 0 rpm indication for chasis fans.the cpu gpu indications are propably correct.please note im not a beta tester and i expect when i buy a product at least to work.if this product is defective (and i read so many complaints)we consumers should be informed and buy on our own risk.

    4 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Hardware  ·  Flag idea as inappropriate…  ·  Admin →
    Eric Lam responded

    Hey there, that is very strange. What fans do you have connected to the Grid+? Have you tried other basic troubleshooting steps?

    - Go to Control Panel and click on “View Devices and Printers” then remove the MCP2200 device or any Unknown USB Device. Then restart your computer and check CAM again
    - Exit out of CAM, then unplug the USB from the device. Then wait 10 seconds and plug the USB back in. Then start CAM again.
    - Use a different USB port on your motherboard

  17. Zelle Support Number

    We apologize to our customers who may be experiencing an issue with making transfers and payments. If you are still receiving errors using the Zelle mobile app

    If you aren't sure of the status of your payment, contact Zelle Support Number.
    Press Inquiries. Thank you for your interest in Zelle. For press and media inquiries only, please click here . For customer service inquiries, please use our contact.
    https://reachcustomerservice-help.8b.io/

    0 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Crashing  ·  Flag idea as inappropriate…  ·  Admin →
  18. Watch NBA Online

    As the Mavs attempt to climb from seventh spot in the West, they're not playing any of different groups in the main seven until their twelfth game after the All-Star break. They're additionally avoiding potential risk with their two stars. The Mavs sat both Luka Doncic and Kristaps Porzingis for the second round of a consecutive on Saturday, tumbling to 5-8 without Doncic in the wake of blowing a noteworthy lead in Atlanta.

    They've won eight of their last 11 games in which Doncic has played, with their success in Orlando on Friday being the fifth time in that stretch…

    0 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Hardware  ·  Flag idea as inappropriate…  ·  Admin →
  19. Cash App Customer Service Number

    With some of the details covered above, you'll still want to succeed in the customer care desk of square cash app. So, here are the phone number, email address and other important contact details of the company.

    Cash App Customer Service Number
    Cash App may be a mobile app that's used for payments. The app’s previous name was Square Cash, and it had been developed by the corporate Square Inc. in March 2015. Cash App allows its users to quickly transfer money to 1 another by using only the app.

    How to request cash app customer service to contact you …

    0 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Crashing  ·  Flag idea as inappropriate…  ·  Admin →
  20. To know the Yahoo issue join Yahoo Phone Number

    If you are a new user of Yahoo, and you want to know about Yahoo issues, to keep your Yahoo account secure. Then you should join Yahoo Phone Number. The support team will provide you all the essential information in a proficient manner. Such as Yahoo appears to be down with the users facing the problem.
    https://www.mailcustomer-service.com/

    0 votes
    Vote
    Sign in
    (thinking…)
    Sign in with: Facebook Google
    Signed in as (Sign out)
    You have left! (?) (thinking…)
    0 comments  ·  Desktop  ·  Flag idea as inappropriate…  ·  Admin →
  • Don't see your idea?

CAM Bugs

Categories

Feedback and Knowledge Base